Category: ‘Auto’

How To Clean A Car : Easy And Hassle Free Tips And Techniques

May 12, 2011 Posted by Admin

Dirty cars are definitely unappealing no matter how expensive they may be. Vehicles that are covered in dust and dirt all look the same and all need the same solution: proper and thorough cleaning.

You shouldn’t let your car stay dirty for a long time in the first place as this causes unwanted problems while also making your vehicle’s value depreciate. Through knowing how to clean a car in an easy and hassle free manner, you will no longer have a car that’s dirty and ugly looking.

Rinsing

Rinsing your car with water through a hose is the very first step you should do to make the dirt easily removable. It is not advised to use any sponge to avoid spreading the dirt and causing other complications. All you need to do is to thoroughly hose down the dirt on the car until you notice that the dirt is already coming off.

Inside Cleaning

Also, never forget to clean the inside of your car. Vacuuming and removing the carpet will help a lot to avoid the accumulation of dirt. Keeping the inside of your car clean and free from clutter is important. Also make sure that additional accessories installed in your car are properly cleaned as well. Personalized add ons such as screamer pipes should also be well maintained to ensure maximum efficiency.

Pre Washing and Main Washing

Pre washing and main washing should both be done to make sure that you car is clean and looks as good as new. A good pre wash product that does not foam and cause lots of bubbles should do the trick. Main washing will require a scrub pad for tough dirt and stains. This can help a lot in successfully removing unwanted dirt that were not removed during the rinsing and the prewashing.

Wheels and Tires

Wheels and tires are pretty hard to clean as they will require some scrubbing and the use of an alloy cleaner and a chemical brake dust. It is advised to wear protective gloves to make sure that you are safe from any danger.

How to clean a car is actually very easy to do. All you need to have is patience and a good eye for dirt and grime so that you will end up with a brand new looking car that could surely catch anyone’s attention.

60 degree V6 Engines– Provide Good Efficiency

February 15, 2011 Posted by Admin

V6 engines come in different cylinder bank angles. The angle which is most efficient among them is 60 degree. It helps in minimizing the size and vibrations. Flat-6 and inline-6 engines have more balance than a 60° V6 engine.

But, the latest techniques in mounting and designing have greatly disguised the vibrations produced in them. 60 degree V6s do not require balance shafts for making them smooth in operation. The modern designs generally make use of 3-throw crankshaft.

60 degree V6 Engines

This helps in providing the desired 120° separation and can also help in the balancing purposes. The ends of crankshaft contain heavy counterweights pair for eliminating most of the secondary imbalance.

This configuration proves useful for cars that are comparatively larger and where four-cylinder engines do not prove sufficient.  It is useful where low cost and compactness are required. General Motors built 60° V6s that has become very popular now.